Gan - Electrics & Electronics

Select your download option below


Read Related Comments

Looks like we do not have much content for this section - but be sure to check Related Businesses. Help us improve the content by sending your feedback and recommended businesses to editor@noonsite.com.


Select your download option below


Gan was last updated 9 years ago.

Related to following destinations: , ,


YachtFlags.com provides high quality courtesy flags that are manufactured in durable Knitted Polyester fabric. Knitted so that the fabric itself does not deteriorate in the constant movement that marine flags are usually exposed to, and polyester so that the flag does not weaken in the strong UV-light usually found in the main sailing areas of the world.

YachtFlags.com offers a discount to Noonsite members.

Use the coupon code NOONSITE_5A2B when checking out to get 10% off today.

Buy Now On YachtFlags.com

YachtFlags.com provides high quality courtesy flags that are manufactured in durable Knitted Polyester fabric. Knitted so that the fabric itself does not deteriorate in the constant movement that marine flags are usually exposed to, and polyester so that the flag does not weaken in the strong UV-light usually found in the main sailing areas of the world.

YachtFlags.com offers a discount to Noonsite members.

Use the coupon code NOONSITE_5A2B when checking out to get 10% off today.

Buy Now On YachtFlags.com

You must Login or Register to submit comments.

  1. June 20, 2021 at 8:27 AM
    svgeorgia says:

    Notes on the Gan harbor anchorage from Georgia (svjeorgia.blogspot.com)
    Gan anchorage
    Outside cut: 00*41.0S, 073*08.75E
    The cut into the Gan anchorage lies between Gan and Feydhoo islands and is in front of the causeway connecting these islands. The cut is not as apparent as the typical cuts further north and the water is often not clear.
    There is a starboard side pole that marks the outer portion of the cut.
    There is a starboard side inner pole on the inside of the cut that is not visible at higher tides.
    The cut has about 10 feet minimum at low tide.

    On the inner, starboard side of the cut is a shallow spot that sticks into the cut. It is often not very visible due to the water clarity. When you get toward the inside of the cut, stay a bit clear of the starboard side ( a little closer to the breakwater wall on your port). You can turn to starboard into the main portion of the anchorage once you have passed the steps that are in the breakwater wall to port.

    Directly ahead of the cut as you enter is an open area with no moorings. This is in front of the tied off to the wall Coast Guard and Police boats. We were told we are not allowed to anchor in this area.

    The anchorage is very tight, with the reef to the east and the existing local boats on moorings. These moorings are continually used, so don’t expect an empty one to stay empty. The holding varies from good sand to somewhat scoured rubble. The scoured portions are where the current flows under the causeway.
    You can’t put out much scope as the winds come from all directions. The anchorage depths range from about 6 feet to 15feet. The anchorage is often rolly at high tide.
    Petrol and diesel are available in the Feydho harbour. Take the dinghy 5 minutes to the harbour and head to the back wall where the petrol station is to fill your jerry jugs.
    Provioning – there are 3 decent grocery stores within walking distance. The 3S store i just across the street and a little south of the petrol station. Its the best place o get eggs as they use a bright flashlight(torch) to check them before they put them in your container.

    We anchored at 00*41.136S, 073*08.608E

    Paul